GEPRC RUN HD3 DJI Air Unit for Freestyle HD FPV

RUN HD3 with the latest DJI Digital Air Unit high-definition FPV System, achieve high-definition FPV in the 3-inch mini Quad, RUN HD3 is mainly used for freestyle fly which can provide incredible sensitivity reaction and easy for portable.

RUN HD3  used STABLE PRO F7 35A flying tower, dual gyroscope ICM20689 works at the same time (most of the gyroscopes currently work in a single job), the feel is smooth and smooth.

The stable flight eliminates the video jelly effect caused by vibrations, allowing pilots to take smoothly footage.

The redesigned frame can ensure stability, the propeller will not show in view during the flight, and the video can be completely for editing. Match with sufficient power 1507 3600KV motor, very handy for doing any motion.

Features:

• No Propellers in the view
• Perfect for DJI FPV HD Full 3K Carbon Fiber
• 720p 120fps FPV
• System:STABLE PRO F7 35A
• Black Box: 32Mb onboard flash memory
• Full Soft Mounted FC System: Provides a clean operating environment for gyro
• Exquisite Assembly Process: Eliminate any potential installation problems
• Weight:200g(without battery)

Specifications:

• Frame: Full 3K Carbon Fiber
• Mounting Holes: 30.5*30.5mm/20*20mm
• Side plate : 1.5mm
• Top plate : 2mm
• Bottom plate : 3mm
• Side plate : 2mm
• Wheelbase : 155mm
• Motors: GR1507 3600KV
• Recommended Battery：4S 850mAh (No inclueded)
• Propeller:GEP 3042 (3 blades)

FPV SYSTEM :

• DJI FPV Air Unit Operating Frequency: 5.725-5.850 GHz
• Transmitter Power (EIRP): FCC/SRRC: <30 dBm
• CE: <14 dBm
• Min. Latency (end-to-end)
• Low Latency Mode (720p/120fps): <28 ms
• High-Quality Mode (720p/60fps): <40 ms
• Max. Transmission Distance: FCC/SRRC: <4 km; CE: <0.7 km
• Video Format: MP4 (Video format: H.264
• Audio format: ACC-LC) I/O
• Interface: USB-C, MMCX, 3-in-1 port, microSD card slot
• Operating Temperature Range: 32° to 104°F (0° to 40°C)
• Input Power: 7.4-17.6 V, about 4-9 W Sensor: 1/3.2” CMOS
• Effective Pixels: 4 M Lens: 2.1 mm, f/2.1
• Shutter: Rolling shutter ISO: 100-25600
• FOV: 150°(D); 122°(H); 93°(V)
• Dimension: 22.1 × 21.1 × 20.1 mm

Electronic System(STABLE PRO F7 35A)

STABLE PRO F7 Flight Controller Specs：

• Model:STABLE PRO F7 35A
• MCU: STM32F722RET6
• IMU: 2x ICM20689(SPI)
• BlackBox: 32Mb onboard Flash
• OSD: BetaFlight OSD w/ AT7456E chip
• Baro:NO BEC
• Output: 5V@3A
• Integrated LC Filter Input Voltage: 2-6S
• Lipo Firmware target: EXF722DUAL
• Size: 26x26mm board, 20mm mounting holes (M2)

STABLE PRO F7 ESC BL32 2-6S 4in1 Specs：

• MCU:STM32F051
• Input:2-6s lipo
• Constant:35Amps
• Burst:45Amps
• Dimensions:31*31mm(including the power pads)
• Mounting Holes:20*20mm,M2
• Supports Dshot1200,Proshot,Oneshot,Multishot
• Current meter: Yes
• Target: GEPRC-BL32-4IN1

Include：

1x RUN HD3 Quadcopter